← Back to all notes
R

Roel Huis in ‘t Veld

Director, Kriya Materials · Week of October 26, 2026

UTG is coming for the dashboard, and the coating question doesn't change

The Elec reported this morning that Dowoo Insys, the company that makes the ultra-thin glass for Samsung's foldables, is developing UTG cover windows for rollable OLED centre displays with a Korean automotive electronics supplier. Development is about halfway, commercialisation is pencilled in for late 2027 to 2028, and Vietnam is the likely production site. I think it will happen, I think it will take the premium segment, and I think the people who should pay attention are not the glass makers but everyone who coats the plastic films that currently do this job. Car makers chose film for curved and rollable screens for two reasons that have not gone away. Film is cheap, and film does not shatter into a driver's lap. UTG at thirty to fifty microns is flexible, but the failure mode is still a crack starting at an edge after enough cycles, which is why the article names thickness and curvature control as the whole technical challenge. A foldable phone sees maybe a hundred thousand folds. A rollable dashboard that extends when you start the car and retracts when you park sees the same radius every single trip, in a cabin that goes from minus forty to plus eighty-five, with sunlight on it for hours. Here is the part the headline misses. Changing the substrate from polyimide or PET to glass does not change what the surface has to do. It still needs a hard coat because UTG this thin scratches, it still needs anti-fingerprint because a touch screen in a car is touched, and it still needs anti-reflection because bare glass throws back four percent per side and a dashboard reflects the sky. All of that has to bend with the glass, survive the same cycle count, and not delaminate at the edge where the crack would start anyway. On film we have been solving exactly that for years. On UTG the coating is thinner, the adhesion chemistry is different, and the thermal expansion mismatch is worse. What this does to the film business is more interesting than it looks. The premium screens go to glass, the mid-range stays on film, and the Tier-1s start asking film suppliers for glass-like surface performance at film prices. Hardness above 2H on a 100 micron film at a 3 millimetre radius, contact angle still above 100 degrees after ten thousand cycles, haze under 0.5 percent after an abrasion test. Those requests already exist for phones. They arrive in automotive with a 15-year lifetime attached. Dowoo Insys converted its exclusive Samsung Display deal into a three-year agreement this month, and this project is its first customer outside that relationship. That is a supplier diversifying ahead of a market that is still two years out. Good for them. For the coatings side, the lesson is the same one the foldable phone taught: the substrate gets the press release, the surface gets the warranty claims. Glass or film, the driver never touches the substrate. They touch the coating.