Drying Profile Planner

What drying profile matches this solvent system?

Check whether oven length, line speed, and temperature give the wet film enough dwell to dry, flagging under-cure when residence time falls below the diffusion estimate.

How it works

A coating dries as its solvent evaporates by diffusion through a growing dry skin. The drying rate is set by the solvent's volatility, the oven-air relative humidity and the mass-transfer coefficient at the coating surface. Too-fast drying leaves surface defects; too-slow drying leaves residual solvent in the film.

Worked example

Vrentas–Duda free-volume diffusion profile

Zone-by-zone drying time from solvent BP, dwell per zone and line speed.

Validation method, references and test-case results: /validation#drying-profile

Request accessOpen the interactive tool