R
Roel Huis in ‘t Veld
Director, Kriya Materials · Week of November 2, 2026
A rollable glass screen in a dashboard is a coatings problem before it is a glass problem
The Elec reported on 26 October that Dowoo Insys, the company that has supplied ultra-thin glass for Samsung's Galaxy Z Fold since 2019, is developing a UTG cover window for rollable OLED displays in car centre information and entertainment screens, together with an unnamed major Korean automotive electronics company.
Commercialisation could start in the second half of 2027, development is described as about halfway complete, and the panel and the extend-and-retract mechanism are still in development too. My reaction: the glass is the part I worry about least. The stack on top of it is where this will be won or lost.
Start with the strain. Bend a sheet of thickness t around radius R and the surface strain is t over 2R. Thirty micron glass around a 10 mm roller sees 0.15% strain, which glass tolerates. But whatever sits on the outside of that glass sees the same strain, every time the screen rolls out and back in, for the life of the car. A thin inorganic anti-reflection layer of a hundred nanometres or so can take that. A hard coat of several microns, the kind that gives a phone its scratch rating, is much more likely to craze at the edges of the bend. The Elec notes that controlling thickness and curvature to avoid cracking is the technical challenge; I would add that the coating must be designed for the same curvature, not qualified afterwards.
Then the automotive requirements that phones never had. A dashboard display sits under direct sun, so the front surface needs real anti-reflection, not just an anti-glare etch, and it needs it at the oblique angles a driver looks from. It needs anti-fingerprint that survives thousands of wipes and, if the car maker is European, is PFAS-free. And on a rollable it has to do all of that while being wound onto a drum where the front surface touches something. Foldable phones solved one fold line with a protective film and a soft top layer. A rollable is a fold line everywhere.
There is a commercial point too. The Elec puts Dowoo's first-half 2026 revenue at 85.7 billion won, of which UTG was 82.6 billion, about 96%, with Samsung Display's exclusive deal now converted into a three-year long-term agreement. This project is the first collaboration with another customer since that change. A supplier that dependent on one customer will move fast on diversification, and Korean automotive electronics is a logical place to go.
What I expect the car makers to ask for next is a cover window delivered as a finished surface: glass, anti-reflection, anti-fingerprint, and a specified number of roll cycles, with one party responsible for the lot. That is a different supply chain from the phone one, where glass, film and coating are often three vendors who meet only in failure analysis.
Thin glass can roll. The question for 2027 is whether the few tens of nanometres on top of it roll along ten thousand times and still look like glass.
Sources
The Elec, “Dowoo Insys Develops UTG for Automotive Rollable OLED Displays”, 26 October 2026. https://www.thelec.net/news/articleView.html?idxno=14876