← Back to all notes
R

Roel Huis in ‘t Veld

Director, Kriya Materials · Week of November 9, 2026

Mercedes wants the window to be the display. The hard part is making it disappear.

Mercedes-Benz published on 3 November a technology piece on two display concepts that put the image in the glass rather than on a screen. The first laminates LED elements into the window composite: mini LEDs in the rear window for brake lights, warnings or traffic information to the cars behind, micro LEDs for smaller, higher-resolution areas. The second is a windshield display in which a projector in the instrument panel hits a transparent film laminated into the glass, with holographic optical elements that reflect only the projector's wavelengths. The image is visible only from set angles, so the passenger can watch a film while the driver sees navigation; when off, the glass is just glass. No partners, no models, no dates; Mercedes says it is "currently working on" this. Digital Trends and Autoblog picked it up this week. My view: I like it, and the interesting engineering sits in two words Mercedes uses in passing, "nearly invisible". A laminated windshield is already a sandwich of glass, interlayer and often a wedge layer for the head-up display. A holographic film is one more polymer layer with its own refractive index between two others. If the indices do not match closely you get a faint ghost of every oncoming headlight; if the film is not flat over a square metre you get haze that a homologation engineer will measure. The payoff is real: because the hologram reflects a narrow band, you can throw far more light at it than at a conventional combiner windshield while keeping the glass clear, hence the sunlight readability claim. But the projector must then stay on the hologram's design wavelength from a winter night to a car parked in August; the film swells with heat and humidity, the glass does not. A materials problem, not a display problem. The rear window is the same story with LEDs instead of film. LEDs laminated into a composite are opaque dots in a transparent medium. To make them disappear when off, the carrier and interlayer must be index matched and the first surface needs an anti-reflective treatment, or you see the array as a grid whenever the sun is behind you. Anyone who has worked on transparent displays knows off is harder than on. What customers will ask for next, if this leaves the research page, is predictable: films that survive autoclave lamination without yellowing, PFAS-free coatings because the glass is sold in Europe, and solar control that does not fight the hologram. Mercedes did not say who makes the film or the LEDs; I will not guess. For a coatings maker the message is that the car window is becoming an optical component with a spec sheet, like a lens. I have seen windshield displays promised since the first head-up displays, and most ended as a small patch for speed and arrows. This one may stick because Mercedes is not promising an image, but that the image can vanish. If the laminators deliver that, the rest is software. Sources Mercedes-Benz Group (technology page), “Mercedes-Benz brings future technologies to life: innovative display solutions and intelligent high-voltage technology in focus”, 3 November 2026. https://group.mercedes-benz.com/technology/innovation/development/display-and-high-voltage-technology.html Digital Trends, “Mercedes-Benz wants to turn your windshield into a giant holographic display”, 4 November 2026. https://www.digitaltrends.com/cars/mercedes-benz-develops-holographic-windshield-and-invisible-car-displays/ Autoblog, “Mercedes-Benz Wants to Turn Windshields Into Screens That Disappear”, 6 November 2026. https://www.autoblog.com/news/mercedes-benz-wants-to-turn-windshields-into-screens-that-disappear