Concepteur de profil de phase de métalentille

How do I design a flat lens from nanopillars?

Concevez une métalentille transmissive insensible à la polarisation : générez la carte de phase radiale, suggérez le pas des nano-piliers et prédisez la MTF dans le plan focal.

How it works

A metalens imposes a position-dependent phase on an incident wavefront using an array of sub-wavelength scatterers. For an ideal thin lens the required phase profile is hyperbolic in the radial coordinate; each scatterer's local geometry selects the phase it imprints. The focal-plane modulation transfer function follows from the achieved phase profile and the scatterer transmission.

Worked example

f 3 mm, Ø 3 mm, λ 532 nm, Kriya HRI pillars

Hyperbolic phase sampled at Nyquist; Airy disk and MTF cutoff from NA.

Validation method, references and test-case results: /validation#metalens

Request accessOpen the interactive tool