Le revêtement HRI thermique atteint RI > 1,8 et 8H de dureté crayon sur verre spécial
Un fabricant de verre spécial
Indicateurs clés
01
Le défi
The glass manufacturer needed a high refractive index coating on display glass (0.7 mm) that could achieve RI 1.85 with maximum hardness. Existing HRI coatings from other suppliers could not reach 8H pencil hardness at these RI levels, and lower cure temperatures were desired to reduce energy costs.
02
Notre approche
Kriya developed three thermal-curable HRI formulation variants (V1, V2, V3), testing cure temperatures from 130°C to 200°C. Formulation optimisation focused on reducing haze through organic compound reduction (V2, V3) while maintaining RI and hardness targets. Low-outgassing variants were developed in response to customer requirements.
03
Le résultat
V1 achieved RI 1.85 and 8H pencil hardness across all cure temperatures (130–200°C). V2 delivered the lowest haze: 0.49% at 200°C cure. All variants achieved 100% adhesion (ASTM D3359). Higher cure temperatures reduced haze significantly, with the majority of improvement occurring at 160°C.
Pourquoi Kriya
Kriya’s sol-gel chemistry uniquely enables 8H pencil hardness at RI 1.85 via thermal cure alone, with tuneable cure temperatures and low-outgassing options that competitors cannot match.
Indicateurs clés
Produits utilisés
Application associée
Optical Components →Discuter d’une application similaire
Notre équipe technique peut vous aider à évaluer si cette approche s’applique à vos exigences spécifiques.