Diseñador de perfil de fase de metalente

How do I design a flat lens from nanopillars?

Diseñe una metalente transmisiva insensible a polarización: genere el mapa de fase radial, sugiera el paso de los nanopilares y prediga la MTF en el plano focal.

How it works

A metalens imposes a position-dependent phase on an incident wavefront using an array of sub-wavelength scatterers. For an ideal thin lens the required phase profile is hyperbolic in the radial coordinate; each scatterer's local geometry selects the phase it imprints. The focal-plane modulation transfer function follows from the achieved phase profile and the scatterer transmission.

Worked example

f 3 mm, Ø 3 mm, λ 532 nm, Kriya HRI pillars

Hyperbolic phase sampled at Nyquist; Airy disk and MTF cutoff from NA.

Validation method, references and test-case results: /validation#metalens

Request accessOpen the interactive tool